Product Description
- Huion H640P is not a standalone tablet. It must be connect to a laptop/computer to work.
- It does not support iPhone or iPad. It only supports Windows , Mac OS and Android OS.
- Driver installation tips: Please donwload the latest tablet driver from Huion official website and Remove Other Brand’s Driver from your computer and reboot before installing the HUION’s driver, or there will be driver conflict problems.
- For Windows Users：Please close all drawing programs and run the driver as Administrator when installing the driver.
- For Mac Users: please Add the “TabletDriverAgent” into the whitelist first after installing the driver on your computer.
- Your phone or tablet must be equipped with Android 6.0 or later and should have OTG function.
- Buttons on the tablet and the pen will not work in phone mode. Also you cannot rotate your Android phone or tablet when using Phone mode.
- The working ares in phone mode is about 62.5 x 100mm to the left.
- Not compatible Android devices list: Nexus 6 /GoogleGalaxy/Samsung Galaxy S6/S7/S8/S9/S7edge/Tab S2
- 1. How to set up left-hand mode?
Step 1. Open the driver interface; click the “Work Area”
Step 2. Select 180° in the “Rotate Set” and click the “OK” or “Apply” button to save changes.
Step 3. Flip the graphic tablet to use.
- 2. Is it palm rejection?
Yes, it is only responded to the pen and the buttons on the tablet. You could rest your hand on the surface while draw/edit/write.
- 3. Is it only for drawing or can I use it with other software?
It can replace computer mouse and be used for anything you want in any software.
- 4. What drawing programs can it work with?
It is compatible with most drawing software including Photoshop, SAI, Illustrator, Corel Draw, Corel Painter, Sketchbook, ,Manga Studio, Clip Studio Paint, Aftereffects, Premiere, Adobe Animate, 3DSMax, Maya, Zbrush, etc.
- 5. Where are the nibs?
There is a built-in nib extractor and the nibs inside the pen holder.
- 6. How to replace the nibs:
Step1.Get your digital pen and pen holder ready, open the pen holder and and find spare nibs and nib clip inside.
Step2.Pull out the pen nib with the extractor down the pen holder.
Step3.Replace the pen nib with the spare one taken from the pen holder.
Step4.Insert the spare nib into the digital pen.
Step5.During which pressure should be applied mildly until the nibs is put in place.
